|
|
Kindergarten in Pustiměř
Trněný, Jan ; Párová,, Jitka (referee) ; Rusinová, Marie (advisor)
This diploma thesis „Kindergarten in Pustiměř“ is processed in the form design documentation for the construction. The building is situated in west part village Pustiměř on the slightly sloping land. Horizontally building corresponds approximately L – shaped, where one site has a two floors and another site has one floor. It is a masonry building, without a basement and with a flat roof. The project will also include the parking lots and pavements. Kindergarten consists of three departments, each with capacity of 20 children. The building also has economy section, section lead and section for a speech therapy and classroom language.
|
|
|
Residence
Tippelt, David ; Skřek, Daniel (referee) ; Bantová, Sylva (advisor)
The subject of this bachelor's thesis is the design and elaboration of project documentation for the new construction of the Rezidence apartment building. The proposed building is located in Brno, in the Slatina district, and is located on land that is protected by an agricultural land fund, so it will be necessary to remove it from the ZPF. This plot is not located in a flooded or mined area. It is a detached building, which has four floors above ground and one underground floor. In the new building there are 12 residential units of 3 + kk and 1 + kk. In the basement there is a cellar for each apartment. In the first half there is a bike shed / carriage house, a cleaning room and a workshop with a warehouse, in the second half there are two technical rooms and a warehouse. On the first floor there is an entrance to the building, a laundry room with a drying room, a gym for the inhabitants of the house and two 1 + kk apartment units. On the second and third floor 4 units of size 1 + kk and on the top floor 2 residential units of size 3 + kk. From the second floor, each apartment has a balcony. These apartments are designed primarily for students, couples, or even a starting family. Each floor is connected by a three-armed reinforced concrete staircase, which is complemented by an elevator. The house is based on reinforced concrete foundation strips in combination with lost formwork. The vertical load-bearing structures in the basement are made up of lost formwork, the load-bearing structures above the ground are made of ceramic blocks, which are insulated with a ventilated façade and equipped with a Bond SK1 façade sandwich cassette. The horizontal load-bearing structures form a semi-assembled Porotherm system. The whole building is covered by a single-skin vegetation-retention flat roof. The new apartment building is designed to be very economical.
|
|
|
Pension for the elderly
Nykodým, Petr ; Třeštíková, Jana (referee) ; Berková, Petra (advisor)
The subject of my diploma thesis is the design documentation for the pension which is designed for the elderly and will be supplemented with a specialty from the air-conditioning branch. The building is situated in the western part of the town Bystřice nad Pernštejnem and it's located at 3058/3 about the total area of 8315,2m. The total footprint of the suggested building is 1161,2 m. The subject has got an irregularly-shaped floor plan. It is made of three subsequent triangels, it has got three above-ground floors with partial basement. The roof of the building is suggested as a warm flat roof with coating insulation. The structural system of a building is designed as longitudinal with shear walls. The exterior building masonry is suggested from sharpened clay blocks Heluz STI 40 with thickness 400 mm. The contact thermal insulation system ETICS with an insulant from EPS with thickness 100 mm is designed for all building. The building for the elderly is from its bigger part meant for citizens who are older than 65 years in the flats for one or two persons in 2FLR and 3FLR. The space for essential services to the residents is located on the 1st FLR. There are also a cafe and a surgery located in a smaller part of the 1st FLR, which are to be used both by the residents and the public.
|
|
|
Apartment building
Danielová, Marie ; Vystrčil, Jan (referee) ; Šuhajda, Karel (advisor)
The aim of the bachelor’s thesis is to processing of the design documentation for a newly-built apartment building. The apartment building is located in Havlíčkův Brod. The building has four above-ground floors and one basement. In the basement there are cellars, technical facilities, a common room, a bicycle room and a cleaning room. There are 8 residential units on the upper floors. The apartments on the ground floor are wheelchair accessible. The apartments on the second to fourth floor have their own balcony. On the second floor there is a common terrace. The apartment building is based on strip foundations made of plain concrete. External walls in the basement are made of calcium silicate blocks and the external walls of the above-ground floors are made of aerated concrete blocks. The floor structure is prefabricated structure, which is made of reinforced concrete beams and aerated concrete inserts. The roofing of the building is made of a vegetation single-skin flat roof. The building is insulated with the ETICS contact insulation system.
|
|
|
Conversion of nursery school
Piškulová, Veronika ; Procházka, Jiří (referee) ; Sobotka, Jindřich (advisor)
The diploma thesis deals with project documentation of new kindergartens in the cadastral area Rohatec. The building is self-standing, two-storey with a partial basement. It is a building designed for the upbringing and education of pre-school children. The capacity of kindergarten is 48 children divided into two classes. Part of the operation is a food preparation zone. The building is designed as a brick made of porous concrete blocks with mineral insulation, based on basic concrete passages. The roofing of the kindergarten is using warm flat roofs.
|
|
|
Center of leisure activities
Kaňovský, Michal ; Utíkal, Aleš (referee) ; Utíkalová, Ivana (advisor)
This diploma thesis presents a project documentation for construction of a center of leisure activities. It's construction site located on the outskirts of town Třebíč, "Na Kopcích" street. The building is composed from the two visual and three service parts which are connected to each other. On the left side in first floor there is a bowling with services and the second floor will serve for sport activities of jumping, spinning or relax massages. On the right side of building will be usable for education or for leisure activities. The building is designed as a two floors with partial basement. The construction system is formed by longitudinal wall system with precast hollow core slab or reinforced concrete slab. The structure is based on strip foundations with walls of permanent formwork. External wall is based on clay brick of therm type. The staircase is designed as prefabricated element or cast-in-place reinforced concrete. The roof is constructed as warm flat green roof with expanded polystyrene with screed to fall.
|
|
|
House with establishment
Podola, Michal ; Blahová, Pavla (referee) ; Čuprová, Danuše (advisor)
The project sloves a new family house with an establishment in a quiet location on the edge of the village Chomýž. The purpose of building is providing basic snacks for tourists and cyclists. The establishment offers indoor and outdoor seating. The house is situated in a slightly steep land near the local trails. It is a three-storey detached building with two floors. The Construction system consists of masonry Porotherm, further insulated system Baumit Open and horizontal structures Miako, also Porotherm. The roof is a part of nailed trusses with a angle of 12°. Above the building there is a single casting flat roof.
|
|
|
Static provision of baroque church
Kadlec, Jaroslav ; Šiška, Radek (referee) ; Strnad, Jiří (advisor)
The master´s thesis solves a static provision of the Baroque church of Saint James in Městečko Trnávka. The church was built in 1752 in Baroque style on the place of the original Romanesque church. It is a single-nave building with dimensions of about 46 × 20 m. The nave is followed by a massive square tower with a height of about 34 m. The reason for the restoration of the church are cracks in the external masonry and arch due to small space stiffness. The building will be reinforced by horizontal and transverse prestressing. They are designed prestressing tendons, called monostrands, using method of alternative cable channels. It will help to avoid other derformations and it will increase a stiffness of the structure.
|
|
|
Medical center Hlinsko
Pilný, Ondřej ; Burianová, Lenka (referee) ; Kacálek, Petr (advisor)
This diploma thesis deals with the design and elaboration process of a project documentation of medical center in city Hlinsko. New building is situated in the northern part of the city in the area determined for constructions of public infrastructure. It´s a four-floor object with partial basement and slant mansard and flat vegetative roof.Object is based on foundation strips and footings made from reinforced concrete.The bearing and internal walls are designed from KALKSANDSTEIN lime sand blocks.The beams and collums are used in the placed designed with open disposition.The ceiling in 1.PP is designed as reinforced concrete for securing fire safety.The rest od ceiling constructions is designed from prestressed concrete panels SPIROLL,with exception in 4.NP,where the ceiling constructions are made from solid roof system YTONG KOMFORT,which is layed on frame system made of steel and reinforced concrete.The peripheral walls of 1.PP are made from lost formwork, which is insulated with extruded polystyrene.The walls in floors above ground are insulated with combination of external thermal insulation system (ETICS) and ventilated facade with CEMBRIT SOLID and PATINA facade cladding panels. The building is functionally divided into several part.Cafe, pharmacy, ambulance and medical center, each with it´s own entrance.Pharmacy is equipped with shop, medicine mixer and storage.Ambulance is equipped with garage slots, background for employees, room of crisis preparedness and operating center.Medical centrum is equipped with emergency, RTG, operating theater, rehabilitations and other types of examination rooms.Each examination room is equipped with waiting room.For more comfort the center has a background for employees.The whole object is designed with forced air exchange. Designed object is barrier-free.In front of the building is situated parking slots for cars, motorbikes and ambulances.Total number of slots is 74 places, which 5 is designed for disabled people.
|
|
|
Apartment building
Kaňa, Josef ; Pilík, Václav (referee) ; Kacálek, Petr (advisor)
The bachelor's thesis, entitled Apartment building, deals with project documentation at the level of documentation of construction for an apartment building. The building itself is located on the outskirts of the village Holešov in the direction of the village Přílepy. New construction sites have been created in the locality and development is planned. At the time of processing the project documentation, there are no buildings in the area and only preparatory work and installation of engineering networks are taking place there. The object is of a simple rectangular shape set in the middle of the plot. Most of the areas in the building are used for housing, the rest for technical and communication facilities. All living rooms are oriented favorably to the sides of the world. The apartment building has three floors and is partially basemented by one underground floor. Flats on the first floor of 4 + KK, flats on the second floor of 3 + KK, flats on the third floor of 2 + KK. The building is designed with a transverse wall masonry system of ceramic brick blocks, based on foundation strips. The project addresses two variants of ceiling structures, namely folded beam ceilings with superstructure and monolithic ceilings made of reinforced concrete. The building is covered with a flat roof. The building uses the ETICS contact thermal insulation system in a variant with mineral wool.
|
guest ::
